When there is a problem with the motor, we should check and solve the fault in time. The premise is that we have a certain understanding of the problems that may occur in the motor. Today, we mainly introduce the noise treatment methods of the brushless DC motor. Please read it carefully.

 

1. The damage of transmission parts is caused by improper operation during installation, resulting in inaccurate or unstable movement of the system; oil film vibration is caused by damage of high-speed moving parts; dynamic imbalance of moving parts is caused by human; vibration and noise are generated during installation, which must be paid attention to and avoided as far as possible in the installation process, and the damaged parts that cannot be repaired must be given attention to Replace it to ensure the stable noise level of the system.

 

2. Vibration reduction and blocking measures during the installation of the reducer, the resonance between the body and the foundation support and connecting parts should be avoided as much as possible, and the resonance of one or several gears in certain speed range often occurs in the interior of the brushless DC motor. In addition to the design reasons, the resonance position is not found during the installation, and the corresponding vibration reduction or resistance measures are taken The breaking measures are directly related. For some reducers requiring low transmission noise and vibration, high toughness and high damping foundation materials should be selected to reduce noise and vibration.

 

3. Due to the looseness of some parts (such as bearing preloading mechanism, shafting positioning mechanism, etc.), the system positioning is inaccurate, abnormal position meshing, shafting movement, and vibration and noise are generated during the installation of the energy-saving deceleration motor of DC brushless speed reduction motor. The system should start from the design structure and try to ensure the connection stability of various mechanisms, and adopt a variety of connection methods In this paper.

 

Among them, the geometric accuracy adjustment of parts and components does not meet the requirements of the standard during installation, which leads to resonance of DC brushless reducer motor parts, thus generating noise. This is directly related to improving the installation process, increasing tooling and ensuring the overall quality of the assembly personnel.